What’s that flame at the top of a refinery pipe stack? Flaring 101

Jun 22, 2017   | Categories: Energy, Environment, Fossil Fuels, Issues, Lower Carbon Future
That flame you see burning at the top of a refinery’s pipe stack is an important, safe and regulated part of the refining process.
 
Although the visual of a flickering flame is eye-catching, there is no need for alarm.
 
Flaring is a crucial, environmentally sound part of converting oil into gasoline and other products, explains Gilles Morel, Director of Fuels for the Canadian Fuels Association.
 
“Flare stacks are primarily used to combust flammable gases that are released through pressure relief valves, rather than emit these gases directly to the atmosphere,” he says.

“Pressure relief valves are essential safety devices that automatically release gas to protect against the danger of over-pressuring industrial equipment and possible equipment rupture,” Morel says. “Pressure relief valves are required by law [through] industrial design codes and standards.”

Flaring also reduces emissions that would otherwise go into the atmosphere by 98 per cent, he adds. The process combusts and breaks down gaseous compounds from their original state to carbon dioxide.
 

How flaring works


During the day-to-day operations of a working refinery, by-products created in the process are collected and routed to recovery tanks for further processing where they are converted into gasoline, diesel, jet fuel and other products. If abnormal conditions occur (such as a power failure, an equipment malfunction or a vessel overpressure), some gases are rerouted to the flare system to be safely combusted, instead of being emitted directly into the air.  

Refinery personnel are constantly monitoring the flare system from an on-site control room.

Rarely, you might see black smoke coming from the flare. That happens when there’s not enough steam available to burn all the hydrocarbons; after a short delay the site personnel adjust the steam as necessary to optimize the combustion process.

People may also notice a rumbling sound coming from the flare. The sound is created by the mixing of vapours, air and steam during the process.
 

Regulating emissions


Flare stack emissions and smoke are strictly regulated by provincial governments. In recent years, refineries themselves have worked hard to develop systems that recover and reprocess excess materials, which has reduced flaring.

“Flare stacks are generally located at the highest point in a refinery,” says Morel. “This assists with emission dispersion, and complying with ground level concentration limits stipulated by government requirements.”
 
Read more about how refinery air emissions have dropped considerably since 2003, and how transportation fuels are getting cleaner all the time.
 
 
 
Most Recent Posts
Aug 15, 2019
Recently, we produced a series of blog posts that discussed innovation developments in the Canadian refining sector; for refiners, these advancements focus on improving efficiency and environmental performance, including reducing GHG emissions. While the innovation wheel moves forward, it’s also important to understand the fundamental economics of refining, and the challenges and opportunities that affect and drive the sector.
This week, we highlight three economic drivers in the Canadian refining sector: Efficiency, Balancing Production & Demand, and Competitiveness.
Jul 25, 2019
At a Sarnia-Lambton chamber of Commerce event in February, Canadian Fuels Vice-President for Ontario Lisa Stilborn explained: “Our products fuel the economy, whether it’s moving goods on Highway 401 or Highway 402, getting passengers from point A to point B in the Greater Toronto Hamilton Area, or fuelling Pearson International Airport.”

Four refineries, part of the Southwestern Ontario Industrial Cluster, are key economic contributors to Canada’s largest provincial economy– and their closure would have permanent negative consequences. These are the findings of a recent report commissioned for Canadian Fuels Association by Aviseo Consulting.

The Economic Impact Study on Southwest Ontario Refineries analyzes the direct, indirect and induced contributions to the province’s economy